DP-AAZZZZZZ-D001-A 1 gas - CH4 % LEL non-pumped, standard battery with rigid legs English ATEX (was DSU-05-EA-R)
Rugged and robust, Detective+ features either fixed or folding legs and a protective frame that allows stacking for easier storage.
Available with an optional internal pump for sampling versatility, alarms are announced with an extremely loud sounder, while multiple beacons ensure 360 degree visibility.
Detective+ may now also be equipped with infra-red (IR) sensors, providing either CO2 detection, or allowing higher levels of flammable gas monitoring. IR sensors also provide immunity to the poisoning effects which standard flammable gas sensors can suffer from. This extends sensor life and further increases measurement confidence in tough applications such as water treatment plants and certain chemical or hydrocarbon processing facilities.
Size : 640 x 455 x 455mm (25.2 x 17.9 x 17.9ins)
Weight: 7.5kg (19lbs)
Alarms: Three large, top mounted red LED clusters and a single red LED on front panel.
Alarm mode: LED clusters flash in quick succession. LED clusters of linked Detectives repeating the alarm, flash
slower than LED lights on those Detectives sensing the hazard
Normal working: Slow flashing green LED
Battery low: Rapid flashing green LED
Wailing alarm, omni-direction siren, 104 dBA at 1m
Display: High contrast LCD with back light. Values and units for up to 4 gases displayed simultaneously at current, TWA or peak levels, low battery, real time and elapsed time calibration and configuration data also displayed.
Data logging: 125hrs at 10-second intervals (45,000 logs)
Event logging: Alarm, over range, calibration, bump, on/off, TWA, 1000 events
Battery: Standard 6V, 7.2Ah, sealed lead acid battery pack
Optional 6V, 12Ah high capacity pack
Up to 36 hours with flammable/ CO2 sensor fitted with 7.2Ah battery
Up to 60 hours with optional 12Ah battery pack
Typical response times: Methane 20s, oxygen 10s, typical toxic gas 20s, IR 20s
No customer reviews for the moment.